top of page
mobile-mapping-hero-scaled.jpg

TrueView MLS - Dry Hire

Geo Drone Solutions operates across a variety of areas of 'LiDAR'. This includes Drone based LiDAR, handheld SLAM and also Mobile Mapping. This is all equipment that we have here within our South East Qld fleet.

The big benefit for our partners, is that we can work together and put this equipment to good effect.

Geo Drone Solutions offers 'Dry hire' to it's survey based partners, this includes Mobile Mapping. 

Mobile Mapping equipment is relatively expensive and complex to use. Given we have this equipment, the software and know how, it makes sense to partner with us before committing to a GeoCue TrueView MLS LiDAR system. The TrueView LiDAR system that we pair with our GeoCue Mobile mapping system is the TrueView 535. Combined with the Wheel encoder, this system offers GNSS accuracy and very dense and clean data.

TrueView 535 3D Imaging System

TrueView 535 3D Imaging System Upgraded with Three New 26 MP Cameras

Hornibrook bridge MLS data

535_Mobile Mapping Projects_edited.jpg

Who is our Mobile Mapping Pro Kit designed for?

Our Mobile Mapping Pro Kit is perfect for customers who have a good basic knowledge of mapping workflows and are ready to go. This dry hire option includes the TrueView 535 sensor with vehicle mount, Land GNSS antenna, DMI wheel encoder, and POSPac MMS software.
mobile-mapping-diagram-pro-kit-3.png

Firmware & software

Vehicle mount

Land GNSS antenna

DMI

(incl. POSPac MMS)

How the DMI, wheel encode, improves data collection and capability

DMI-1.png

DMI

The DMI is connected to the wheel of the vehicle and connected to the board of the mobile mapping system.

​

When driving in cities, or in proximity of trees, customers can face GNSS masks due to obstructions such as buildings, tunnels, trees, etc.

​​

The DMI compensates by providing information such as distance.

​​

The DMI is very specific to the wheel used. The circumference of the tyre is used within the calibration settings for the system. Use of the wheel encoder greatly helps to establish and maintain IMU alignment. 

payload-high-3_4left-trueview_535-VC_545mobile-mount.png

TRUEVIEW 535 MLS DRY HIRE

INCLUDES:

  • TrueView 535 3DIS LiDAR System

  • Vehicle Mount (Fixed roof & cabling kit)

  • Land GNSS Antenna

  • DMI wheel encoder with cabling

  • POSPac MMS software (specific for Mobile Mapping)

  • GeoCue LP360 with Mobile Mapping modules


System is kept up to date with respect to hardware, firmware and calibration!

​Failed systems are exchanged within 2-4 business days.

​

Available Rental Commitments:

  • 1 Week

  • 2 Weeks

  • 1 Month

  • 3 Months

  • 12 Months

Use LP360 for data processing

Process your mobile mapping data with LP360.

lp360-mobile-mapping-screenshot-1.jpg
showing-the-status-of-the-mobile-mapping-project.jpg

Manage your mobile mapping project in real time, using the dedicated application

Easily configure your equipment when switching from drone to mobile mapping data collection.

switch-from-drone-mapping-to-mobile-mapping-easily.jpg
point-cloud-screen-shot001.jpg

Easily import, view, share and work with your data in LP360. Generate colorized pointclouds using the 360 degree camera in cooperation with your TrueView sensor.

We recently partnered with our customer DSQ Survey on the Sunshine Coast.

This involved running our TrueView 535 MLS system across various road-based jobs that had previously been surveyed with traditional survey methods. The results met our expectation of GNSS accuracy and displayed the typical TrueView 535 traits of an accurate, dense and refined cloud.

⭐⭐⭐⭐⭐

"I found time today to look at the MLS data and it all came in really well. I was able to check this against a previous survey from 2019, and the verticals came in very tight.


I'm very impressed with the quality and density of the data, especially around the kerbs and median strips."

​

Trent Park,

Survey Drafter

2903-1 (8).png

RENTAL REQUIREMENTS

In order for you to rent our Mobile Mapping system, certain requirements need to be met. Unlike our drone-based dry hire, no CASA qualifications are required for mobile mapping. However, other requirements apply:

  • Your organisation needs to have the survey capability to provide control and process the data, or arrangements made for GDS to post-process on your behalf.

  • Vehicle insurance covering the equipment whilst mounted needs to be in place. Our insurance covers the equipment for in transit insurance whilst being freighted within Australia

  • Your Certificate of Currency will need to list GeoCue Australia as the interested party and will also need to refer to the equipment type and serial number.

  • The DMI is specific to the wheel size of the vehicle being used. We will need details of your vehicle and tyre specifications before rental.

  • For first-time renters, we require a training session (included) to ensure you're comfortable with setup and operation.

Untitled design (21)_edited.jpg

Frequently asked questions

What will be the workflow when processing a point cloud coming from mobile mapping?
We use the same LP360 workflow as drone LiDAR sensors. 
 
Are any specific LP360 modules & Apps required to run and process the mobile mapping data?Yes, Mobile Mapping modules are included in the Basic, Pro and Expert packages.
 
Will we offer specific training related to our Mobile Mapping systems?
Yes. During our work together we can certainly bring you up to speed on setting up and using the hardware and software. GeoCue Group also offers Mobile Mapping Group Training Sessions at their Huntsville, Alabama office.
 
Do I need to change settings if I change car?
Where the system is mounted with regard to the centerline of the car and the relationship to the rear axle is measured and used. If the specifics across vehicles is the same then no, if these details change then a profile for each vehicle type would be needed. 
bottom of page